Drive along the Ronald Reagan Memorial Highway through south Arlington and turn onto the streets around Oldfield Drive and Rambling Creek Drive, and you’ll pass block after block of brick-veneer homes built in the 1980s and 1990s. A surprising number of them still have their original aluminum windows. If you’re planning a bigger remodel, those windows land on the list sooner or later, and the real question is whether they belong in this project or the next one.
- Key Takeaways
- Why Do Original Windows Matter in a Whole-Home Remodel?
- Which Window Types Hold Up in Texas Heat?
- What Order Should Windows Go In During a Remodel?
- Should You Choose Insert or Full-Frame Replacement?
- Does Window Replacement Need a Permit in Arlington?
- Can New Windows Cut Down Road Noise Near the Highway?
- What Homeowners Near Clif Nelson Park Usually Run Into
- Planning Your Home Remodeling in Arlington?
- FAQ
- Home Remodeling help near Arlington
Key Takeaways: Should You Replace Windows in a Remodel
- Original aluminum windows are a common weak point in 1980s and 1990s south Arlington homes, and a remodel is the most convenient time to deal with them.
- Energy matters: the U.S. Department of Energy reports that heat gain and loss through windows accounts for roughly 25 to 30 percent of residential heating and cooling energy use.
- Order early: custom units often take several weeks, and the finish work around each opening waits on them.
- Permits apply: window replacement is permitted and inspected work through the City of Arlington, and your contractor should handle the paperwork.
- Insert or full-frame: full-frame replacement takes more effort but solves rot, racked openings and size changes.
Why Do Original Windows Matter in a Whole-Home Remodel?
Because on a 30-year-old tract home the windows are often the single biggest source of heat gain, drafts and hidden water damage, and a home renovation is the only time the trim, drywall and siding around them get opened up anyway.
Many homes in this part of south Arlington were built with builder-grade aluminum frames and single-pane glass. Aluminum conducts heat readily. On a July afternoon the frame itself gets hot to the touch and the glass does almost nothing to slow the sun, so a west-facing living room keeps the air conditioner running long after dark. Texas humidity adds a second problem in winter: the cold frame sweats, condensation runs down to the sill, and over the years it stains or softens the drywall below.
Crews opening up walls during a home renovation regularly find that damage hiding behind the trim. It’s rarely dramatic. Usually it’s a soft sill or a stained stud, and catching it while the wall is open is far cheaper than finding it later.
There’s also a finish argument. If you’re repainting and reworking trim throughout the house, patching around a new window afterward means doing some of that work twice.

Which Window Types Hold Up in Texas Heat?
Vinyl, fiberglass and composite frames all outperform old aluminum in this climate. The right choice usually comes down to budget, the frame color you want and how much direct sun each wall takes.
Here’s how the common frame types compare for a home in the DFW area:
The glass matters as much as the frame. A low-E coating, which is a thin metallic layer that reflects heat, tuned for hot climates blocks a large share of solar gain without making the room look dark. Ask for the solar heat gain coefficient, or SHGC, on every quote. Lower numbers block more sun, which is exactly what you want on west and south walls.
What Order Should Windows Go In During a Remodel?
Measure and order first, demolish second, install windows before drywall patching and paint, and finish the exterior trim before the final walkthrough. Our home remodeling service in Arlington builds this sequence into the schedule so the rest of the house isn’t waiting on a shipment.
In practice the window work inside a larger project looks like this:
You can read how this fits into a full project on our remodeling process page.
Ready to Plan Your Home Remodel in Arlington?
Tired of aluminum windows that sweat in winter and bake in summer? We measure, order and install them inside your larger project so the finish work happens once, for homes around Clif Nelson Park and across south Arlington.
Should You Choose Insert or Full-Frame Replacement?
Inserts, sometimes called pocket replacements, fit inside the existing frame and are faster and less invasive. Full-frame replacement removes everything back to the rough opening. It’s the better choice when the old frame is rotted, out of square, or you want a different size or shape.
Many homes in this part of south Arlington sit on slab foundations over expansive clay soil. As that soil swells in a wet spring and shrinks through a dry August, the house moves a little. Over three decades that movement can rack a window opening slightly out of square. An insert window set into a crooked frame will never slide or lock smoothly, so a crew that finds a racked opening will usually recommend full-frame work for that unit, even if inserts are fine everywhere else in the house.
Brick veneer changes the detail work too. Full-frame replacement on brick means working carefully at the brick mold and the sealant line so the finished edge looks like it was always there. It’s not hard, but it’s a step a careful crew plans for rather than improvises on install day.
One honest trade-off with inserts: the new unit sits inside the old frame, so you lose a little glass area on each window.

Does Window Replacement Need a Permit in Arlington?
In general, yes. Replacing windows is permitted and inspected work through the City of Arlington, and your contractor handles the application and inspection scheduling for you as part of the larger remodel.
Cities pay attention to windows for a few reasons. Bedroom windows have to be large enough to climb out of in an emergency. Glass next to a tub, a shower, a door or close to the floor usually has to be tempered so it breaks safely. And the energy code sets performance expectations for new units. Exact requirements vary by city and change over time, so treat this as general background and let a professional assessment settle the specifics for your house.
For you as the homeowner, a permit means a little lead time, a possible inspection visit, and an insured contractor on the job. Southern Home Remodeling is insured as required by the cities for permits. A permitted job also leaves a record with the city, which tends to make a future sale easier.

Can New Windows Cut Down Road Noise Near the Highway?
Somewhat. Double-pane units with a reasonable air gap and good sealing reduce road noise noticeably compared with single-pane aluminum, though no window makes a home silent next to the Ronald Reagan Memorial Highway.
Most of the improvement actually comes from sealing. Old aluminum sliders leak air around the sash and through worn weatherstripping, and sound follows air. A new unit foamed and sealed into a clean opening closes those paths. If noise is a priority, ask about laminated glass or panes of different thicknesses, which dampen sound better than two identical panes.
Get Your Whole-Home Remodel Estimate in Arlington
Racked openings, rotted sills and mismatched windows are easier to fix while the walls are open. Book a free in-home estimate for your home near the Ronald Reagan Memorial Highway and get a clear order of work.
What Homeowners Near Clif Nelson Park Usually Run Into
The most common surprise is a soft sill. Decades of condensation under an aluminum frame can rot the wood sill or the bottom of the jamb without any sign on the painted surface. It shows up when the old unit comes out, and the fix is usually a sister piece of lumber or a new sill before the replacement goes in.
Windows painted shut are another regular find, especially on homes near Little Elementary School that have been repainted a few times over the years. They often haven’t opened in a decade, which means the weep holes at the bottom of the frame are clogged and water has been sitting where it shouldn’t.
Mismatched earlier replacements come up often. A previous owner swapped two windows on the front of the house with a different style or grid pattern, and now the home renovation is the chance to bring everything back to one consistent look. It’s worth standing in the street and looking at the front elevation before finalizing the order.
Finally, hairline cracks in the brick at window corners are common on slab homes in this area. They’re usually cosmetic and related to the same clay-soil movement described above, but a crew should note them and point out anything that looks like more than normal settling.

Planning Your Home Remodeling in Arlington?
Our office at 1611 W Sanford St near downtown Arlington is about 9 km (around 5.5 miles) from the neighborhoods around Oldfield Drive, Gene Schrickel, Jr. Park and the I-20 corridor. Southern Home Remodeling is owner-run, led by Cristian Quimbayo, who has been building across DFW since 2011 and operating as Southern Home Remodeling since 2016. John Tavera manages projects day to day, and the team brings more than 40 years of combined experience in construction and construction lending. You can read more about Cristian Quimbayo and the team before you call.
If windows are one piece of a bigger plan, start with a free in-home estimate. We’ll measure the openings, check the frames for rot and squareness, and lay out the order of work so nothing waits on a shipment. Whether that leads to a single bathroom or a whole-house project, our home remodeling service in Arlington covers the design, the permits and the finish work in one schedule. Looking for home remodeling contractors in Arlington who will treat your windows as part of the house rather than an afterthought? That’s the conversation we like to have.
Start Your Arlington Home Remodeling Project Today
From the window order to the final inspection, one team handles the schedule. Call Southern Home Remodeling for a free in-home estimate anywhere in the 76017 area and beyond.
The office is open Monday through Saturday, 8AM to 6PM. Call 817-330-9499 or book your free in-home estimate online, and we’ll come out to your home near Clif Nelson Park at a time that suits you.
FAQ
Home Remodeling help near Arlington
Southern Home Remodeling works throughout Arlington, including the Arlington area around Ronald Reagan Memorial Highway and Oldfield Drive, near Clif Nelson Park and Gene Schrickel, Jr. Park. Projects in 76017 are permitted and inspected through the City of Arlington, and our team handles that paperwork as part of the job.
Our office at 1611 W Sanford St, Arlington, TX 76012 is about 5.6 miles from Arlington, so an in-home estimate is easy to schedule. Call 817-330-9499 or use the estimate button below.
Service page for this area: Home Remodeling in Arlington. City guide: home remodeling in Arlington.





